Search Catalog
      GO   
 All Categories    Automatic Rockwell - Brinell Hardness Testers
View Cart View RFQs
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Metallographic Products > Metallographic Equipment > Hardness Testers > Automatic Rockwell - Brinell Hardness Testers  
 

Automatic Rockwell - Brinell Hardness Testers


Click on a Product to view details.

DAKOMASTER 300 Universal and Automatic Hardness Tester

DAKOMASTER 300


UNIVERSAL AND AUTOMATIC HARDNESS TESTER for Rockwell , Brinell and Vickers test. ABSOLUTE AND QUICK TESTS A single command pulse activates the automatic sequence: the approach and the contact of the piece from 340 mm to 0 mm, its locking, the measurement cycle execution, the transmission and the display of the results. This hardness tester is motor-driven, loads are automatically selected and applied, with high definition (0,01 HRC) and operation also ensured under extreme conditions. COMPACT The reduced head dimensions allow to test small pieces or carry out tests inside tubes. Furthermore, the hardness tester is compact and can be easily transported for field testing. POWERFUL SOFTWARE The hardness tester is equipped with a ...
250 MRS Automatic Hardness Tester

250 MRS


Automatic Hardness Tester Model 250 MRS Conforms to ASTM-E18- EN-ISO 6508-2 6506-2 / 6507-2 Conforms to CE safety with emergency button. AFFRI 250 MRS is an automatic and motorized hardness tester with load cell aligned with the indenter, Closed Loop System with a motorized stroke and automatic clamping (patent AFFRI). Universal use for Rockwell ? Superficial Rockwell ? Brinell ? and generate Vickers indentations. The Measuring head is motorized for a 2 ? 50mm stroke and press piece that follow the surface of test piece. One single start button to initiate the measurement, the head moves down it take contact with test piece from every distance, it clamps and run the cycle without interruption. It automatically compensates for ...
3302 MRS Hardness Tester

3302 MRS


The hardness tester model 3302MRS performs Rockwell, Brinell ,Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384. A SINGLE INPUT TO START in automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The Hardness tester model 3302MRS can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and ...
3332 MRS Hardness Tester

3332 MRS


The hardness tester model 3332MRS performs Rockwell, Brinell ,Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384. A SINGLE INPUT TO START in automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The Hardness tester model 3332MRS can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and ...
3332 MRS A Hardness Tester

3332 MRS A


The hardness tester model 3332MRSA performs Rockwell, Brinell ,Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384. A SINGLE INPUT TO START in automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The Hardness tester model 3332MRSA can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and ...
330 RS Unique Hardness Tester

330 RS


A UNIQUE HARDNESS TESTER The 330 RS hardness tester performs Rockwell, Brinell, Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384 A SINGLE INPUT TO START an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and ...
270 RS Unique Hardness Tester

270 RS


A UNIQUE HARDNESS TESTER The 270 RS hardness tester performs Rockwell, Brinell, Vickers tests conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTME384 A SINGLE INPUT TO START an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied ...
331 RS Hardness Tester

331 RS


The 331 RS hardness tester performs Rockwell, Brinell, Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTME384 A SINGLE INPUT TO START an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and indentation is measured ...
206 RS Hardness Tester

206 RS


A SINGLE INPUT TO START an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum. AUTOMATIC CONTACT WITH THE TEST PIECE. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and indentation is measured automatically on Rockwell, Vickers or Brinell procedure. - The system is capable of measuring accurately even if the test piece deflects up to ...
DAKOMASTER 300 Universal and Automatic Hardness Tester

DAKOMASTER 300 Universal and Automatic Hardness Tester


Universal and Automatic Hardness Tester for Rockwell , Brinell and Vickers test.

Absolute and Quick Tests

A single command pulse activates the automatic sequence: the approach and the contact of the piece from 340 mm to 0 mm, its locking, the measurement cycle execution, the transmission and the display of the results. This hardness tester is motor-driven, loads are automatically selected and applied, with high definition (0,01 HRC) and operation also ensured under extreme conditions.

Compact

The reduced head dimensions allow to test small pieces or carry out tests inside tubes. Furthermore, the hardness tester is compact and can be easily transported for field testing.

Powerful ...
250 MRS Automatic Hardness Tester

250 MRS Automatic Hardness Tester


Automatic Hardness Tester Model 250 MRS
Conforms to ASTM-E18- EN-ISO 6508-2 6506-2 / 6507-2
Conforms to CE safety with emergency button.

AFFRI 250 MRS is an automatic and motorized hardness tester with load cell aligned with the indenter, Closed Loop System with a motorized stroke and automatic clamping (patent AFFRI). Universal use for Rockwell, Superficial Rockwell, Brinell and generate Vickers indentations. The Measuring head is motorized for a 250 mm stroke and press piece that follow the surface of test piece. One single start button to initiate the measurement, the head moves down it take contact with test piece from every distance, it clamps and run the cycle without interruption. It automatically compensates for any ...
3302 MRS Hardness Tester

3302 MRS Hardness Tester


The hardness tester model 3302MRS performs Rockwell, Brinell ,Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384.

A Single Input to Start in automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The Hardness tester model 3302MRS can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the ...
3332 MRS Hardness Tester

3332 MRS Hardness Tester


The hardness tester model 3332MRS performs Rockwell, Brinell ,Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384.

A Single Input to Start in automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The Hardness tester model 3332MRS can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the ...
3332 MRS A Hardness Tester

3332 MRS A Hardness Tester


The hardness tester model 3332MRSA performs Rockwell, Brinell, Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384.

A Single Input to Start in automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The Hardness tester model 3332MRSA can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, ...
330 RS Unique Hardness Tester

330 RS Unique Hardness Tester


A Unique Hardness Tester. The 330 RS hardness tester performs Rockwell, Brinell, Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTM E384

A Single Input to Start an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, ...
270 RS Unique Hardness Tester

270 RS Unique Hardness Tester


A Unique Hardness Tester. The 270 RS hardness tester performs Rockwell, Brinell, Vickers tests conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTME384

A Single Input to Start an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, ...
331 RS Hardness Tester

331 RS Hardness Tester


The 331 RS Hardness Tester performs Rockwell, Brinell, Vickers test conform to ASTM E-18; ISO 6508; ASTM E10; ISO 6506; ISO 6507; ASTME384

A Single Input to Start an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and ...
206 RS Hardness Tester

206 RS Hardness Tester


A Single Input to Start an automatic sequence without interruption applies the minor and major load and measure the Rockwell indentation automatically. All test operations are managed through a single start command to reduce operator fatigue and to increase test repeatability and accuracy to the maximum.

Automatic Contact with the Test Piece. The AFFRI® system can perform automatic contact with the test piece surface without moving the piece. It automatically moves the indenter and the measuring system until contact is made, the piece is clamped, the force applied and indentation is measured automatically on Rockwell, Vickers or Brinell procedure.
  • The system is capable of measuring accurately even if the test ...