Home
Machinery
Lapping/Polishing Consumables
Accessories
Services
Bore-Honing
Metallographic Products
Cleaning
About
Contact
Search Catalog
By Keyword
By Item #
All Categories
LSP 30
Shopping Cart
0 Items
Request for Quote
0 Items
All Categories
>
Machinery
>
Lapping / Polishing Machinery
>
Dualface Machinery
>
Item # LMDFF-30
Item # LMDFF-30, LSP 30
Printable Page
Email This Page
Save To Favorites
Please wait…
Precision Dual Face Flat Lapping/Polishing Machine
The Lapmaster Model LSP 30 is a 3-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing precise and repeatable results. The LSP 30 can lap or polish a wide range of materials to very tight specifications.
The LSP 30 is driven by three, variable speed motors for maximum process control flexibility. All three rotating machine components, the bottom plate, sun gear, and ring gear, are independently controlled. The top plate is fixed, suspended with a continuous wire. This unique suspension method (patent pending) allows the top plate to follow the movements of the bottom plate typically associated with run-out and uneven incoming part sizes more accurately than traditional dual face machine designs. As an option, a fourth motor isavailable for driving the top plate in order to create a 4-way motion machine configuration.
The LSP 30 incorporates a hydro dynamic plain bearing to support the bottom plate. This unique design virtually eliminates both plate run-out and vibration that are typically associated with ball bearing or table bearing designs. This system levitates the bottom plate with hydraulic force, ensuring minimal bearing deformation under load.
The machine is operated through a graphical interface to a programmable controller. The custom designed software prompts the operator for specific operating parameters and stores up to 8 different lapping and polishing routines containing up to 20 different process steps which can be recalled for later use.
The five work carriers are gear driven for smooth action while processing fragile parts. Plate and carrier speeds and acceleration are precisely controlled through AC frequency inverters for gentle machine cycle start and end steps. The outer gear drive drops below the plate for the facilitation of machine loading and unloading. The top plate down pressure is continuously monitored and adjusted through the control system to maintain constant weight on the parts.
The machine is built on a heavy duty, cast and fabricated frame. Wetted parts and hardware are made from corrosion-resistant materials. The entire head assembly is supported by a heavy-duty fabricated bridge design. The overhead arm suspending the head assembly can be swung out of the way for easy lapping plate or polishing pad replacement.
Slurry is fed through the top plate by a variable speed, peristaltic pumping system. A propeller type agitator keeps the abrasive suspended until use.
A part thickness sizing device to automatically shut off the machine, a water rinse at the end of each run to assist in cleaning, and 316 Stainless Steel wetted components are also available options.
Custom lapping and polishing plates are available upon request, as are special electrical services. Each machine comes complete with a set of four conditioning gears, a flatness gauge, and a starter kit of abrasive, vehicle, and carriers.
larger image
larger image
Specifications
Standard Features
Standard Tooling/Accessories
Available Options
Electrical Services
Model Type
LSP 30
Lapping Plate O.D.
78.4
inches
Lapping Plate O.D.
1992
mm
Lapping Plate I.D.
27.1
inches
Lapping Plate I.D.
688
mm
Lapping Plate Thickness
2.4
inches
Lapping Plate Thickness
60
mm
Polishing Plate O.D.
81.2
inches
Polishing Plate O.D.
2062
mm
Polishing Plate I.D.
24.3
inches
Polishing Plate I.D.
618
mm
Polishing Plate Thickness
2.4
inches
Polishing Plate Thickness
60
mm
Upper Lapping Plate Drive
18.5
kW
Upper Lapping Plate Drive
25
HP
Upper Polishing Plate Drive
30
kW
Upper Polishing Plate Drive
40
HP
Bottom Lapping Plate Drive
18.5
kW
Bottom Lapping Plate Drive
25
HP
Bottom Lapping Plate Speed
5 - 50
rpm
Bottom Polishing Plate Drive
30
kW
Bottom Polishing Plate Drive
40
HP
Bottom Polishing Plate Speed
5 - 50
rpm
Sun Gear Drive
7.5
kW
Sun Gear Drive
10
HP
Sun Gear Drive Speed
5 - 34
rpm
Ring Gear Drive
7.5
kW
Ring Gear Drive
10
HP
Ring Gear Drive Speed
5 - 38
rpm
Shipping Weight
22000
kg
Shipping Weight
48400
lbs
Net Weight
21000
kg
Net Weight
46200
lbs
Height
146
inches
Height
3690
mm
Width
3675
mm
Length
133
inches
Length
3370
mm
Power Supply
200 V/220 V, 3 phase, 50/60 Hz