Search Catalog
      GO   
 All Categories    LSP 6
View Cart View RFQs
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Machinery > Lapping / Polishing Machinery > Dualface Machinery > Item # LSP-6  
Add To Cart Request Quote

Item # LSP-6, LSP 6


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The Lapmaster model LSP-6 is a 4-way, planetary, dual face lapping and polishing machine with a sophisticated control system. It can execute complex lapping and polishing routines while producing precise and repeatable results.
  • The LSP-6 is able to process extremely thin, fragile components to very tight tolerances repeatably. The machine is initially configurated to handle either 66-tooth (140mm/5.5” pitch diameter) or 50-tooth (107mm/4.2” pitch diameter) work carriers, and is easily converted between either configuration.
  • Operation is governed by a programmable controller. Custom software prompts the operator for specific operating parameters and stores up to 10 routines for recall as needed. Password protection is available to restrict access to programming or program selection.
  • Through a load cell, the controller continually monitors and adjusts the top plate weight to maintain constant pressure on the parts. The LSP-6 has a unique combination of pneumatic pressure controls, frame design, and load control algorithms produce the most accurate and repeatable tolerance results in the industry.
  • The five carriers are gear driven for smooth action while lapping thin, fragile parts. In the 66-tooth carrier configuration, the machine holds 5 carriers and can lap or polish most parts down to .076mm/.003” thick. In the 50-tooth carrier configuration, the machine holds 8 carriers and can lap or polish most parts down to .051mm/.002” thick.
  • Plates and carrier speeds are varied through AC frequency inverters.
  • The machine is built on a box beam frame and the top plate is supported from a frame bridge for stability and durability. The ring gear drops down below the plate to make loading and unloading easier.
  • Outward opening, clear plastic guards protect the operator during machine operation. They also keep the slurry confined to the machine, keeping the shop clean.
  • Slurry is fed through a variable speed pump. A propeller type agitator guarantees that abrasive stays suspended.
  • A part thickness sizing device to automatically shut off the machine, and a water rinse at the end of each run to assist in cleaning are optional.
  • Custom lapping and polishing plates are available upon request, as are special electrical services.
  • Each machine comes complete with a set of four conditioning gears, a flatness gauge, and a starter kit of abrasive, vehicle and carriers.





 Specifications   Standard Features   Standard Tooling   Available Options   

Model Type

LSP-6

Plate Diameter

15 inches

Plate Diameter

381 mm

Length

33 inches

Length

838 mm

Width

67 inches

Width

1702 mm

Height

89 inches

Height

2261 mm

Est. Shipping Weight

2,200 lbs

Est. Shipping Weight

998 kg

No. of Carriers

5
8

Carrier Root Diameter

4.2 - 5.5 inches

Carrier Root Diameter

107 - 140 mm

Maximum Part Circle

3.5 - 5.0 inches

Maximum Part Circle

89 - 127 mm

Maximum Part Down Pressure

300 lbs

Maximum Part Down Pressure

136 kg

Top Plate Drive

0.75 HP

Top Plate Drive

0.56 kW

Bottom Plate Drive

0.75 HP

Bottom Plate Drive

0.56 kW

Sun Gear Drive

0.5 HP

Sun Gear Drive

0.37 kW

Compressed Air

80 PSI

Compressed Air

3 CFM


Add To Cart Request Quote