Search Catalog
      GO   
 All Categories    Topos Interferometer
View Cart View RFQs
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Accessories > Flatness Instruments > Topos Interferometer > View Items  

Topos Interferometer

Check up to five results to perform an action.

Instuments for Fast, High - Accuracy, Non - Contact Flatness Measurement of Precicsion Parts.
  • Instruments for non-contact flatness measurement of precision-manufacturing surfaces with sub-micron accuracy. They meet the requirements for objectively working measurement tools for the production and quality control of sophisticated components, such as those being utilized, for instance, in fuel injection systems, pumps or valves.
  • The measurements principle is based on interferometr y with grazing incidence of light. This set-up allows for flatness measurements of polished as well as non-reflective, rougher surfaces, which would not be measurable with traditional interferometers for flatness testing. An air gap between prism and part ensures maximum possible protection against mechanical damage and facilitates simple handling.
  • The sensitivity can be selected from four calibrated settings. Upon manufacturer’s deliver y, 0.5, 1, 2, and 4um/fringe are provided by default. This wide range allows for optimal setting of the measurement system to the specific properties of the test part. In this way, surfaces of ultra-high precision such as polished mechanical seals can be measured with the highest sensitivity (0.5 um per fringe), while the lower sensitivity levels allow the measurement of rougher, uneven or highly worn-out surfaces as well. Typical areas of application for TOPOS are the flatness measurement of lapped, flat-hones and fine-ground precision parts, valve plates, sealing and control discs, mechanical seals made of ceramics (AI2O3, SiC, SiN), metal (steel, aluminum, bronze), carbon or synthetics (duroplast, thermoplast, PMMA).
  • The computer based evaluation provides for three-dimensional, fast and objective parts testing. According to the principle of dynamic fringe evaluation, several phase-shifted fringe images are acquired with the built in CCD camera, from which the form is then determined. During the measurement, the acquisition of the fringe images takes approximately 1.2 seconds, and the computation of the form takes about one to three seconds for up to 300.000 data points. The measurement area to be evaluated can be found automatically by the program or, alternatively, be user-determined by selecting from a number of basic geometrical shapes (circle, ellipse, ring or rectangle). Position and size can be set easily with the help of a border line which is overlaid to the image of the part. A border exclusion can be set separately for the external and the internal contour.
  • For continually repetitive sequences of functions (such as measurement, tilt subtraction, border exclusion, median filtering, display of false-color image and 3-D graphics), a macro for an automated measurement procedure can be generated and saved on the computer. Furthermore, all parameters chosen for an individual measurement during the measurement procedure are saved, which facilitates relating a measurement to a product and hence allows for rapid switches between different parts.
  • Measurement can be saved and thus be evaluated and printed out at a later time.
  • Data export to statistics and quality control programs is established by saving the series of the measurement results either in a CSV data format, in qs-STAT data format or via the serial interface.
  • For the documentation of the part’s flatness, several graphical options are available: false-color image, 3-D image, cross section graphs with the four main cross sections, measurement protocol with the 3-D image and the section graphs, developed views for rings, and relief representation. Ever y graph displays the user-selectable legend and the measurement parameters.
  • In the production facility, TOPOS Interferometers are installed directly next to the tooling machines. This ensures short distances and fast monitoring of product quality. In case of special production environments, the interferometers can be encapsulated specifically with regard to dust and oil-containing air.
  • Due to their completely non-contact and fast measurement, TOPOS Interferometers are used in the automated 100% control of parts. For example, during the 100% control of mechanical seals, more than 1200 parts per hour are measured during 3-shift operation.




    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items Add To Cart Request Quote
   
  Results 1 - 2 of 2 1 

Item #

Sort by

Item Name

Diameter Φ

Data Acquisition Time (CA)

Interferometer Unit Weight

Interferometer Mount Weight

TOPOS 100 Topos Interferometer 100 mm 1.2 sec. 83 kg 50 kg
TOPOS 50 Topos Interferometer 50 mm 1.2 sec. 34 kg 32 kg
  Results 1 - 2 of 2 1