|
|
|
|
Item # LLCD-700, LLCD Optical Polisher
|
|
|
|
|
|
Precision Oscillating Head Polishing Machine- To complement our extensive range of Single and dual face lapping and polishing machines Lapmaster has introduced a new line of precision oscillating head polishing machines.
- Designated the LLCD series they are, primarily, Microprocessor controlled pad polishing machines specially designed for processing large area glass substrates, they can however also be used as lapping machines.
- A self aligning swing arm assembly positioned above the polishing surface is mounted to a swivel head work piece pressure plate. Work pieces of varying geometries can be retained by surface tension or vacuum to the pressure plate.
- The pressure plate is designed to swivel up from the horizontal working position to just past vertical to facilitate work piece loading and unloading.
- The LLCD series is also offered in a dual faced configuration, processing both sides at once via an oscillating carrier between two rotating plates.
- The machine consists of a heavy-duty base which houses both the polishing plate and the swing arm drive systems.
- The Polishing plate has a polishing pad (type dependent on material to be processed) bonded directly to its upper surface.
- Polishing compound is supplied to the centre of the Top or Bottom or both polishing plates via a re-circulatory pumped system. Water can also be supplied to the same de tination on demand.
- The work piece pressure plate, which is positioned above the polishing plate, is attached to the swing arm via a selfaligning bearing.
- Both the stroke and radius of the swing arm are adjustable. This unique combination of rotating plate and oscillating work piece movement ensures :
- Maximum utilization of the polishing surface.
- Suppression and elimination of “tracking” effects on the polishing surface.
- Improved control of polishing surface flatness.
- Precise optical flatness control of work piece.
- The LLCD series of machines ability to be set up for use as a lapping or polishing means they can be used for processing large Plano optics including : Calcium, Fluoride, Fused, Silica, BK7, Quartz, Zerodur etc.
- In addition to processing a wide variety of materials in an extensive range of industries : L.C.D, Faceplates, Silicon Wafers, I.C, Photo masks, Crystalline substrates (Sapphire, Gadolinium, Gallium Garnet etc.), Ceramics, Ferrites, Filter Glasses etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
